2.17.0
2026-10-16 · build 2386Changed
Zoom an NDI camera with a lever in the Camera window, in place of the zoom slider, which made some cameras judder: drag toward Wide or Tele and it zooms, faster the further you drag; let go and it stops.
Zoom an NDI camera with a lever in the Camera window, in place of the zoom slider, which made some cameras judder: drag toward Wide or Tele and it zooms, faster the further you drag; let go and it stops.
Remove a source from its card's right-click menu, at any card size and when the card is collapsed too. It asks first, as the trash button does.
Panning an NDI camera went the wrong way: dragging right in the Camera window, an arrow key, or a Stream Deck or Companion button turned it left. It now turns the way you ask.
The Camera window's zoom slider went the wrong way on NDI cameras: toward Tele zoomed out. The + and − buttons were right and are unchanged.
Pan, tilt and presets for NDI cameras. The Camera window of an NDI camera that takes PTZ has a pad to pan and tilt (drag, or the arrow keys), Home, a Speed, and nine presets: click one to go there, ⌥-click to store the shot. Recall camera preset sends a camera to a preset from a hotkey, a rule, the Stream Deck's new Camera Preset action, Companion or the control API.
Pan, tilt and zoom from a Stream Deck or Companion button. The Stream Deck's new PTZ action, and Companion's, move an NDI camera while the button is held, at the button's own speed, and stop it when you let go; or send it home. If the deck or Companion disconnects while a button is held, InterDirector stops the camera.
Companion module 0.1.21, with actions to send an NDI camera to a preset and to move it while a button is held, and a section of buttons for each camera's presets and moves. Get it from Help ▸ Get the Bitfocus Companion Module and import it in Companion.
Shows saved by this version cannot be opened by an earlier one.
Control an NDI camera from InterDirector. An NDI camera that takes PTZ control has a camera button on its card: it opens a Camera window of its own, with its zoom, focus, exposure and white balance. Open as many as you have cameras.
NDI and External come back on with your Show. Whether they are on is saved with the Show, and a Show opened with either on, the Last Show after a crash or a restart included, starts it again by itself. Streaming and recording still start only when you press them.
Shows saved by this version cannot be opened by an earlier one.
Set up ReCast's platforms in InterDirector. ReCast has a page of its own in the Streaming window, with its six outputs: paste each platform's server and stream key, switch it on air or off, and see whether it is live, and choose how the portrait outputs are made. They are saved in the Show and given to the next ReCast you start, so there is nothing to type again. ReCast's own page still works, and the two stay in step.
The Streaming window lists everything down its side: Encoding, each destination with a dot for its state, ReCast, and Add Destination. Each opens beside the list, so a Show with many destinations no longer makes one long page.
ReCast's page no longer has Rotate stream key, which stopped InterDirector's stream to it.
Shows saved by this version cannot be opened by an earlier one.
ReCast no longer writes your platforms' stream keys into its log. It names only the platform's server.
Portrait streams for Shorts, Reels and TikTok. A stream destination with its own encoding can be portrait, 1080 × 1920 or 720 × 1280, while the others stay landscape: Program turned a quarter clockwise, all of Program with black above and below, or the middle of Program filling the frame. Choose it under the destination's Picture in the Streaming window.
Trim a replay clip. Put the Replay input in Preview and the strip under it shows the selected clip's whole length: drag along it to find a frame, then press [ or ] to start or end the clip there, or drag the handles. The clip plays from its In to its Out, alone or in a bucket, and the clip list shows how long it now plays. Nothing is cut from the file; Clear Trim in the clip's menu plays all of it again.
Shows saved by this version cannot be opened by an earlier one.
InterDirector in video calls: a camera and a microphone of its own. Google Meet, Zoom, Teams and any other app list InterDirector Camera and InterDirector Audio. Choose Tools › Meeting Apps… to send Program or one input to the camera, and Master or a bus to the microphone, with a delay to keep them together. Install the camera once from Tools › Install InterDirector Camera… and allow it in System Settings; install the microphone from Meeting Apps, which asks for your password. Both are kept up to date as InterDirector updates: the camera by itself, the microphone after asking you once.
A new automation rule waits for you to choose what it does. Its action starts as Select source and Select action and does nothing until both are chosen; it used to start as a Cut to Program of the source itself, which acted on air the moment the rule was added. The journal now says every rule added, removed, switched on or off, or changed.
Cutting back and forth between two sources stopped swapping them. A rule on one of them that cut to it when it reached Program put the same source in Preview and on Program, every fourth cut. A Cut or Fade to Program of a source already on Program now does nothing.
An update offer at launch no longer hides behind the startup window. It waits until you have chosen a Show, where it used to appear behind the window and could not be clicked until it closed.
Vibrance in an input's Colour tab. It makes the dull colours more colourful, or less, and leaves the vivid ones and skin tones mostly as they are, so a flat camera picture can be livened up without oversaturating what was already strong.
Video FX: black & white, noise reduction, blur, sharpen and a vignette on any input. Each effect has its own switch in the input's new Video FX tab, with its settings under it, and applies wherever the input is shown. Switch any of them on, off, or either from a hotkey, a rule, the web remote, the control API, the Stream Deck's new Video FX action or Companion's, lit while it is on. Noise reduction, blur and sharpen are worked out once for each frame, however many places show the input.
Colour and Video FX on Program. The gear beside Fade to Black opens Program's own colour correction, grading, LUT and Video FX: the same controls an input has, applied to whatever is on Program, under the overlays, on every output. Switch Program's Video FX from a hotkey, a rule, a Stream Deck key or Companion by choosing Program as the source. Shows saved with this version open only in this version or later.
Duplicate a hotkey. A hotkey's row has a Duplicate button, and its right-click menu a Duplicate item: the copy does the same, appears just below it, and waits for a key of its own.
Version History in the update window. When an update is offered, a Version History button opens the whole changelog, so if you skipped a version or two you can read everything that changed since yours.
Companion module 0.1.19, with a Video FX action for an input or Program, a feedback while an effect is on, and ready-made buttons for each effect. Get it from Help ▸ Get the Bitfocus Companion Module and import it in Companion.
Actions are listed under headings wherever you choose one, for a hotkey or a rule: Switching, Overlays, Media, Replay, Sound, Picture, Data, Output and Show. Typing a heading's name in the list shows all of its actions.
InterDirector ReCast: restreaming with a safety net. For the hours you buy, send one high-quality stream from the venue instead of one per platform: ReCast sends it on to all of them from the cloud. And if the venue's upload dies, your viewers see a slate, never a loading spinner, and your Program comes back by itself. Start it from Tools ▸ ReCast… or the Streaming window; when it is ready it becomes a destination of its own, and Open ReCast takes you to its page, signed in.
A Composite layer's Size & Position window opens wide, with the picture beside its settings, rather than tall with the settings below.
The picture in Size & Position and Layer Layout stays at the top beside its settings. In a tall window it floated down and moved about as the window was resized.
A QR code for InterDirector Cam. A network input's settings now choose which phone app the QR code sets up: InterDirector Cam, InterDirector's own iPhone camera app, or Larix as before. InterDirector Cam's code also sets the phone to the Show's frame rate and resolution.
Jump within a media clip. The transport under Preview and Program has a thin bar along its bottom for a media clip: click or drag it to jump there. Nothing jumps until you let go, and while a clip is paused the picture follows the drag. Under Program the bar is red, since the jump happens on air.
Show and hide a Composite's layers from a key. A hotkey, a rule, a Stream Deck key or a Companion button can show, hide, or show or hide one of a Composite's layers, chosen by name ("Stage · Cam 1"), lit while the layer is visible. The Stream Deck plugin has a new Layer action, and the Companion module 0.1.17 a Show or hide a Composite's layer action, a feedback and a preset for each layer; update it from the download page. Hiding a layer leaves its sound as it is.
Shows saved by this version cannot be opened by an earlier one.
A phone or encoder sending over SRT, RTMP or RTSP at the Show's own frame rate no longer looks like half its rate at times. Program now shows each of its frames when its time comes, as it already did for NDI sources.
Pausing a video clip keeps its place. Paused half way, it could show twice the time it had played and carry on from there, or from the end. A clip of sound alone now shows its time moving while it plays.
A Composite's settings, left open, no longer put back a layer a key has just shown or hidden when you change something else in them.
A Stream Deck key for the zoom and position animations lights while they are on. It never lit. A key for one source's animation is now lit while that source's animation is on, and shows the source's tally otherwise. In Companion, the module adds a Zoom/position animation on feedback and an ANIMATE preset under Switching.
A hotkey for the animations lights only while something animates, as the Animations button in the operator window does, rather than whenever the Show's switch is on.
Receive a phone or an encoder over the internet. In a Network Stream input's settings, set Comes in to Over the Internet, choose a region and press Get an Address: a phone on mobile data, anywhere, can then send to it, with no open port or public address needed. A server starts in that region only when you press Start Server, while adding the input or in its settings, or Start on its card; its session lasts 24 hours. A licence can hold up to six such addresses, all in one region, and receive on all six at once; at six, Release Addresses No Open Show Uses… frees those left in Shows closed without saving.
A QR code sets Larix up to send. A listening RTMP or SRT input, and an input over the internet, show a QR code that adds the connection to Larix Broadcaster in one scan, beside the addresses to copy for any other app.
The input's delay setting says how much memory the delay holds, measured from the running source, and warns when the delays of all your inputs together would take more than half of your Mac's memory.
An input's delay now goes up to four seconds, from two, so cameras on cables can wait for a source that arrives later, such as a phone sending over the internet. Each second of delay holds that second of the input's picture in memory.
A card without a picture says what its source is doing: waiting for a sender, starting, or ready to start, rather than "Offline" whenever it is not live.
Shows saved by this version cannot be opened by an earlier one.
An NDI source no longer stutters for minutes at a time. A source sending at the same frame rate as Program, such as a phone over NDI at 30 frames a second, could look like it ran at half that rate now and then. Program now shows each NDI frame when its time comes rather than when it arrives.
Effects on Master now process the buses that return into it. A limiter on Master did nothing to a source that reached Master only through a bus, such as hosts routed to Bus A. Master's effects now come after the buses return into it and before Master's fader, as in a recording app. A bus whose effects add delay also lines up with Master's direct sound now.
Dragging a source card onto another card moves it again. Since 2.3.0 the drop was taken for files from Finder and nothing happened; dropping past the last card still worked. A card let go of in the gap between two cards now lands there too, beside the nearer one, rather than at the end.
The Overlay button under the transitions reads Overlay On while an overlay is on air, rather than naming what a press would do.